{"product_id":"ipower-gm110-10-gimbal-motor-with-encoder","title":"iPower GM110-10 Gimbal Motor with Encoder","description":"\u003cp\u003e\u003cspan\u003eThe AS5048 is an easy-to-use 360° angle position sensor with a 14-bit high-resolution output. The maximum system accuracy is 0.05° assuming linearization and averaging is done by the external microcontroller. The IC measures the absolute position of the magnet’s rotation angle and consists of Hall sensors, the analog-digital converter, and digital signal processing. The zero position can be programmed via SPI or IC command. Therefore no programmer is needed anymore. This simplifies the assembly of the complete system because the zero position of the magnet does not need to be mechanically aligned. This helps developers to shorten their developing time. The sensor tolerates misalignment, air gap variations, temperature variations and as well as external magnetic fields. This robustness and wide temperature range (-40°C up to +150°C) of the AS5048 makes the IC ideal for rotation angle sensing in harsh industrial and medical environments. Several AS5048 ICs can be connected in the daisy chain for serial data read out. The absolute position information of the magnet is directly accessible over a PWM output and can be read out over a standard SPI or a high-speed IC interface. Version AS5048A comes with SPI and PWM Interface. Version AS5048B is configured with the IC interface and has also a PWM output. An internal voltage regulator allows the AS5048 to operate at either 3.3 V or 5 V supplies.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIt is specially designed for iPower Motor GBM5208 GBM6208 GBM6212 GBM8017 GBM8028 GBM8108 GBM110 Motor, Please note that there should be screw holes on the gimbal motor to fit the metal mounting plate, otherwise you'll need to DIY to mount. The dimension of the aluminum alloy part is shown below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e360° contactless angle position sensor  \u003c\/p\u003e\n\u003cp\u003eStandard SPI or high speed IC interface and PWM \u003c\/p\u003e\n\u003cp\u003eSimple programmable zero position via SPI or IC command  \u003c\/p\u003e\n\u003cp\u003eNo programmer needed\u003c\/p\u003e\n\u003cp\u003e14-bit full scale resolution 0.0219°\/LSB  \u003c\/p\u003e\n\u003cp\u003eAngle accuracy 0.05°after system linearization and averaging \u003c\/p\u003e\n\u003cp\u003eDaisy chain capability  \u003c\/p\u003e\n\u003cp\u003eTolerant to air gap variations   magnetic field input range: 30mT – 70mT \u003c\/p\u003e\n\u003cp\u003e-40°C to +150°C ambient temperature range \u003c\/p\u003e\n\u003cp\u003e3.3V \/ 5V compliant \u003c\/p\u003e\n\u003cp\u003e14-pin TSSOP package (5x6.4mm)\u003c\/p\u003e\n\u003cp\u003eMagnets size 6mm x 2.5mm\u003c\/p\u003e\n\u003cp\u003eThe principle of the camera stabilization using brushless direct-drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.\u003c\/p\u003e\n\u003cp\u003eSpecially designed for SLR aerial and Z-axis DIY Parts\u003c\/p\u003e\n\u003cp\u003eSealed Case to prevent contamination by dust and dirt.\u003c\/p\u003e\n\u003cp\u003eHollow shaft for slipring\u003c\/p\u003e\n\u003cp\u003eConfiguration: 36N42P ,prove more torque.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eModel: GM110-10\u003c\/p\u003e\n\u003cp\u003eMotor Out Diameter: Ф110±0.05mm\u003c\/p\u003e\n\u003cp\u003eConfiguration: 36N\/42P\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMotor Height: 33.4±0.2mm (Included with Encoder housing)\u003c\/p\u003e\n\u003cp\u003eHollow Shaft(OD): Ф25-0.008\/-0.012 mm\u003c\/p\u003e\n\u003cp\u003eHollow Shaft(ID): Ф22+0.05\/+0.1 mm\u003c\/p\u003e\n\u003cp\u003eWire Length: 610±3mm\u003c\/p\u003e\n\u003cp\u003eCable AWG: #24\u003c\/p\u003e\n\u003cp\u003eMotor Weight: 556±1g\u003c\/p\u003e\n\u003cp\u003eWire plug: 2.5mm dupont connector\u003c\/p\u003e\n\u003cp\u003eNo-load current: 0.16±0.1 A\u003c\/p\u003e\n\u003cp\u003eNo-load volts: 20 V\u003c\/p\u003e\n\u003cp\u003eNo-load Rpm: 292~323 RPM\u003c\/p\u003e\n\u003cp\u003eLoad current: 2 A\u003c\/p\u003e\n\u003cp\u003eLoad volts: 20 V\u003c\/p\u003e\n\u003cp\u003eLoad torque(g·cm): 9000-15000\u003c\/p\u003e\n\u003cp\u003eMotor internal resistance: 4.16Ω±5%（Resistance varies with temperature）\u003c\/p\u003e\n\u003cp\u003eHigh voltage test: DC500V 1mA @2sec\u003c\/p\u003e\n\u003cp\u003eRotor housing runout: ≤0.1mm\u003c\/p\u003e\n\u003cp\u003eSteering (axle extension): clockwise\u003c\/p\u003e\n\u003cp\u003eHigh-low temperature test:\u003c\/p\u003e\n\u003cp\u003eHigh temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature\u003c\/p\u003e\n\u003cp\u003eLow temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature\u003c\/p\u003e\n\u003cp\u003eMaximum power: ≤80W\u003c\/p\u003e\n\u003cp\u003eWorking current: 4-6S\u003c\/p\u003e\n\u003cp\u003eWorking temperature: -20~60℃;10~90%RH\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePacking List\u003c\/h3\u003e\n\u003cp\u003e1 x GM110-10 brushless gimbal motor\u003c\/p\u003e\n\u003cp\u003e1 x  AS5048A Encoder with aluminum case\u003c\/p\u003e\n\u003c!----\u003e","brand":"iFlight","offers":[{"title":"Default Title","offer_id":48242309005577,"sku":"GD17437","price":254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0657\/0527\/9753\/files\/ipower-gm110-10-gimbal-motor-wencoder-728710.png?v=1722909502","url":"https:\/\/iflighteurope.com\/products\/ipower-gm110-10-gimbal-motor-with-encoder","provider":"iFlight Europe","version":"1.0","type":"link"}